Front Crank Wear Sleeve Installer Kit Seal Tool 303-761 For 2003-2010 Ford 6.0L

Description

Front Crank Wear Sleeve Installer Kit Seal Tool 303-761 For 2003-2010 Ford 6.0L
APPLICATION:
Engineered and manufactured specifically for the repair environment, compatible with Ford 2003-2010 compatible with Powerstroke 6.0L.
FUNCTION:
Replaces OE# 303-761. The Front Crank Wear Sleeve Installer Kit install the delicate wear sleeve to the correct depth without any damage.
ADVANTAGE:
Radiator, fan and shroud removal is not required. It is nearly impossible to perform without an installation tool, this tool allows to perform a 3 hour job in 1 hour!
MATERIAL:
Made of high standard quality steel and rubber material resisting impact, crack and deformation with strong toughness and durability.
GUARANTEE:
Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this tool kit, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.
How to Use 6.0L compatible with Powerstroke Front Crank Wear Sleeve Driver/Installer Kit Tool with Sleeve & Seal
Begin by breaking loose the four front crankshaft dampener bolts. Then remove the belt. (The belt just needs to be slid off the upper idler pulley to allow enough slack to remove the crank pulley.) Finish removing the bolts and the front pulley. Fan, shroud, and radiator are shown removed for clarity, but removal is not required.
Remove the five 10mm bolts that attach the oil pump cover and crank seal.
With the cover removed, clean the oil from the area around the pump.
Tape the area as shown with wide masking tape to prevent debris from getting into the pump gears.
Use a small cut off wheel to carefully cut through the old wear sleeve (if present) and remove the sleeve.
Clean the crankshaft - fine sandpaper may be required.
Install the new wear sleeve into the tool and coat the inside of the sleeve with a light layer of red Loctite.
Slide installer and sleeve onto crankshaft
Lightly tap installer with a hammer until it bottoms out.
Remove installer - your sleeve is now installed to the correct depth. Remove tape, clean surfaces thoroughly, and apply some engine oil to the pump gears. Install new seal into pump cover and complete reassembly.
Installer-Front
Installer-Back
Sleeve
Seal
▶.
We accept payment via Payoneer.
▶.
S&H will be determined based upon the SHIP TO address.
▶.
Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.
▶.
Items will be shipped within 1-3 business day when we received payment.
▶.
We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.
▶.
We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.
▶.
Leave a message note in returned box quoting your item(s) ID and buyer ID
.
▶.
All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
▶.
It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
▶.
Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return
▶.
Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.
We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday
.
▶.
We maintain high standards of excellence
and strive for 100% customer satisfaction!
Feedback is very important to us.
▶.
Pls contact me first before you leave Neutral
or Negative
feedback. i will do my best to solve the problem, thanks!