Mercedes-Benz SL R129 hydraulic roof rebuilt seal kit all cylinder 90-2002

Description

SEAL KIT FOR ALL HYDRAULIC CYLINDER of the Roof / Top Hydraulic system  MERCEDES BENZ SL R129 1990-2002
Kit comes with 2 additional seal kits (14 in total ) .It will fit on all manufaturing years (all running changes covered).
Items are shipped from warehouse in Houston / Texas . Fast delivery
PLEASE NOTE THAT THESE ARE NOT CHEAP HYDRAULIC SEALS FROM THE HARDWARE STORE. THESE ARE ASYMMETRICAL ROD SEALS, WHICH WE HAVE MANUFACTURED IN THE RIGHT DESIGN AND THE RIGHT MATERIAL TO ENSURE THE CORRECT FUNCTION AND DURABILITY. IN ORDER TO KEEP THE MANUFACTURING TOLERANCES LOW, WE MANUFACTURE OUR SEALS USING THE DIE CASTING PROCESS. OUR SEALS HAVE THE SAME DESIGN AS THE ORIGINAL SEALS (ASYSMETRIC SEALING LIPS)
Seal kit for fixing an external leakage of all Hydraulic cylinder.
(We also offer the Port seals please see on our shop)
Mercedes Benz TYPE R129 all years of construction it contains 2 additional gasket sets so that all years of construction fit with the different installed hydraulic cylinders.
consisting of:
4xDS005 for hydraulic cilinder  1298000072  tonneau cover locks
2x DS003 for hydraulic cilinder 1298000272 Main lift cilinder
2x DS001 for hydraulic cilinder  1298001672 front top locks
2x DS006 for hydraulic cilinders 1298001772 and 1298001872 / 1248000272 left and right extension bow cilinder
2x DS004 for hidraulic cylinder 1298002072 tonneau cover lift cilinder
2x DS002 for hydraulic cilinder 1298002172 extension bow locks
Due to the age-related disappearance of the plasticizer, the rod seal becomes porous and ruptures. It creates a leak when operating the roof hydraulics.
This leak is corrected with our seal kit.
With clean installation, the cylinders are sealed again for the next 20 years.(Please note that it can vary due to long exposure of the car in sun and high temperature when car is stored )
This Seal kit consists of:
1. 14 rod seals made of a special polyurethane mixture
2. 14 o-rings for the cap.
Due to the new material mixture of the rod seal is this More resistant, tear-resistant and heat-resistant than the original seal
We have redesigned sealing profiles combined with a new slip-modified, thermoplastic polyurethane material. These gaskets are made of profile and materials that make them ideal for this application:
High tensile strength
Lower friction
no noise
High thermal capacity: up to 240 ° F (green seals made of PU) and 410 ° F (brown seals made of FKM (VITON)
By manufacturing by injection molding, we guarantee consistent quality.
These seals are, in our opinion, of the profile and material used far superior to the original seals.
Please note only hydraulic oils to use with the Mercedes-Benz aproval number 343.0
Made in Germany
Made in Germany and only best materials used for this seals.
We have 10 Years of experience developing and using our seals.
Our Seal partnumbers and cylinders :
DS001 Front locks: 129 800 1672 (2 each)
DS003 Main lifts: 129 800 0272 (2 each)
DS006 Rear bow: 129 800 1772/124 800 0272(can be also A1298001872 in cars up to 1995) (2 each)
DS005/DS002Rear locks:  129 800 0072(DS005)from 1989-1991 depending on the model year or 129 800 2172(DS002) from 1992-2001 (2 each)
DS005  Tonneau cover locks 1298000072 1989-1995 (2 each) 1995-2001 (can have 1 only in the right side)
DS004 Tonneau cover lifts: 129 800 2072 (2 each)
Each set for 14 hydraulic cylinders contain a u-cup ring and a o-ring .
Set contains 14 seal kits for following hydraulic cylinders:
4x A 1298000072
2x A 1298000272
2x A 1298001672
1x A 1298001772
1x A 1298001872 / A 1248000272
2x A 1298002072
2x A 1298002172
We use this seals since 10 years for our Rebuilded hydraulic cylinders, same elastomer used as it is in original cylinders.