-40%

Original Disc Adhesive Plate Hangers Set of 4x1.25"

$ 4.72

Availability: 34 in stock
  • For Plate Size: up to 4"
  • For Weight: 1 lbs.
  • Item Height: 1.8"
  • Size: 1.25"
  • Type: Invisible Plate Hanger
  • Use on Wooden Articles: Not recommended, sticks to some and not others
  • Items/Set: 4
  • Brand: The Flatirons Disc Co.
  • Item Width: 1.25"
  • Material: Fabric
  • Country/Region of Manufacture: United Kingdom
  • Manufacturer: The Disc Plate Hanger Co.
  • Item Length: Less Than 10 in
  • Color: Yellow
  • Use on China and Porcelain Bowls: Fired items provide strong bond & great 3D effect
  • Condition: New
  • Use on Mirrors: Silvering on back of mirror glass may prevent bond
  • Potential Uses: All fired materials, e.g. unglazed backs of tiles
  • Use on Plastic: Does not adhere to all plastic, such as melamine
  • Use on Glass: Transparency of glass items make disc visible
  • UPC: 762470787415

    Description

    Original Invisible Disc Adhesive Plate Hangers
    These English Plate Hangers have been tested and proven for over 30 years. Use them to hang porcelain, china, earthenware, glass, unvarnished wood, and more. Display your plates, platters, trays, trivets, chargers, decorative crafts, and three-dimensional household decor on your walls.
    One and a quarter inch hangers are ideal for hanging smaller 3 dimensional objects. They can fit hidden behind small trivets, coasters, silverware, cups, mugs, and almost any small figure or decor you want to hang. You can trim them to even fit smaller surfaces.
    1.25" hangers also work great on collector plates, as you can put them on the outer part of the plates to avoid covering writing or labels.
    No More Ugly Wires
    Disc hangers fit totally behind the plate or any item you hang. Unlike a wire plate hanger, that shows hooks, clips, or wires, disc plate hangers are invisible when you look at the plate. They will not distract from your wall hangings.
    Note
    : Disc hangers have a yellow color. They are clearly visible behind glass or transparent plates.
    Easily Removable
    Discs remove without marking plates. They are designed so that they can be used and removed without spoiling the plate's underglaze markings. Just soak the plate in warm water to remove the Disc.
    Plates Lay Flat against the Wall
    Wire plate hangers may have springs and sizable hardware that make them lay awkward on a wall. Disc play hangers adhere flat against the back of plates and decor, and therefore display your decor nicely on the wall.
    Great for Collector Plates
    Collector plates often have writing or paper labels on the back. You do not want to disturb these. Wire plate hangers may hide the writing or label. Use two small plate hangers attached to the lips or side of plate. String picture hanging wire between them. Take care not to get any labels wet.
    Safety Assured
    With correct preparation and installation, the adhesive hangers provide a strong bond that will adhere permanently to your hangings. The glue will not deteriorate over time. The discs remain unaffected by normal fluctuations in household temperature and humidity. They will not chip or damage plates like wire and spring loaded plate hangers.
    Perfect for Large Displays and Small Decor
    The large adhesive hangers provide the perfect solution for hanging large trays and bowls. Use more than one hanger to hang larger and heavier items. Trim the adhesive discs to hang smaller items and get the perfect fit.
    Ideal for Odd Shaped Items
    Unlike wire plate hangers, discs work on most any shaped object. You can trim them to fit three dimensional and irregular shaped crafts and decor.
    Easy to Use
    Follow directions carefully.
    Clean the back of the plate by hand, even if the plate is new. Use dishwashing liquid. Rinse thoroughly and dry with clean cloth. Plate
    must
    be clean for disc to bond.
    Use fingers to mix water into glue on disc. Wait 3-7 minutes for glue to become sticky. Glue will appear milky white.
    Apply disc to plate. Make sure to place the hanging ring in the correct position for the plate design. Press firmly and rub well to expel any air.
    Let dry overnight.
    Very Important:
    Perform a "Pull Test" to test strength of the adhesion before hanging. To perform the "Pull Test" pull firmly on the ring to ensure the disc has adhered to the plate.
    Available in Five Sizes for Any Size Plate
    Disc Size
    Purpose
    Support Weight up to
    1 1/4" (30mm)
    For plates up to 4" (100mm) diameter
    1lb (500g)
    2" (50mm)
    For plates up to 6" (150mm) diameter
    2lbs (1Kg)
    3" (75mm)
    For plates up to 8" (200mm) diameter
    3lbs (1.5Kg)
    4" (100mm)
    For plates up to 12" (200mm) diameter
    5.5lbs (2.5Kg)
    5.5" (140mm)
    For large plates
    7lbs (3Kg)