½ Gallon Capacity Add-It Fertilizer Injector with ½" Female Pipe Threads

Description

½
Gallon Capacity Add-It Fertilizer Injector
with
½
" FPT inlet/outlet
Model AFI 5050
ASAE award-winning Add-It proportioning fertilizer injector
A Minimum of
½
GPM flow rate and 10 PSI is required to operate!
There is NO pressure loss! Maximum pressure rating of 60 PSI
This injector can be installed installed under constant pressure!
A vacuum breaker should be installed upstream of the injector
Description
ASAE award-winning HEAVY DUTY Add-It proportioning fertilizer injector and foliage feeder with ½ gallon capacity and
½
" FPT inlet/outlet.
A minimum of
½
GPM and 10 PSI is required to operate! There is NO pressure loss! Can be installed under constant line pressure!.
This injector is proportioning. The injection rate stays the same from start to finish, 200:1, that’s 200 parts water to 1 part additive, unlike most other injectors on the market today.
This injector is of particular benefit to those who use a drip irrigation system, because an injector is the only means of fertilizing easily, efficiently and economically.
If utilizing a drip irrigation system in order to conserve water as well as save time, no longer can you broadcast dry granular fertilizer to the soil surface and expect it to be leached into the soil where the plants roots can pick-up the nutrients. Therefore, the fertilizer must be dispensed directly through the drip irrigation system. Larger units and models are also available.
Check out all our injectors listed in our eBay Store for your fertigation needs.
(Used units cannot be returned for any reason except for warranty replacement.) Built to last longer than just one season! Proudly made in the USA!
NOTICE!
When purchasing more than one item we will combine shipping charges whenever possible.
After
placing your order, but
before
paying for your order, please
request
an invoice.
Please take a look at all the products we offer in our eBay Store!
Feedback Policy
We give feedback on all
completed
transactions. We consider a transaction complete after the following: You have paid, we have shipped, you have received the item to your complete satisfaction, and have left us feedback. Once you leave us feedback, our feedback is usually left within 48 hours. Thank you!
Terms & Conditions of Sale
Products may not be returned for ANY reason without prior authorization. A RGA number is essential and may be obtained from the order desk. Claims for defective material MUST be made within thirty (30) days from receipt of goods. Claims for damaged goods should be made directly to the freight carrier, not the factory. Hold onto damaged goods, in the original containers, until they have been inspected.